Orikam NeoSpray Handpiece Accessory

Neospray is a high-performance, non-toxic, odorless, colorless, and tasteless lubricant solution for cleaning and lubricating dental instruments with care.

Advantages:

It ensures effective lubrication and reduces debris formation

Protects from corrosion, reduces friction & wear-rate increasing the lifespan of the instruments

Application:For high speed, low speed dental handpiece equipments like air turbine, air motor, heads, prophy angle / contra angle etc.

FEATURES

Efficient and Economical

Effective Lubrication

Reduce Friction

KEY SPECIFICATIONS

Caution: Pressurised and extremely flammable aerosol. This
is a pressurised can.

Do not puncture, heat or incinerate.

Keep away from direct or open flame, hot surface, heat source and other ignition source.

Do not spray on flame or ignited materials.

Always use in well ventilated area.

Avoid eye and skin contact.

To avoid spray inhalation or its escape into the surrounding, always use absorbent paper/cloth.

Storage: Store below 50°C, keep away from sunlight

DIRECTION TO USE

1: Detach the contra-angle frome motorhandpiece and clean the surface

2: Conect one and of the nozzel (com with the motor) to newspray and other (black ring and) to the base of the contra angle . They should fit well

3: Cover the ontra-angle surface with a holding the newspray bottle upright -spray full pressure.

4: Keep rinping off the debris thet oozes out of the shank side and repeat until clear oil come out.

5: Wipe off excess of oil frome th surface and possition of the contra-angle vertically for 2-3 hours to allow excess oil drain out.

6: Shrink wrap the contra-angle in strile barrier packges . At temperature of 135 degress c the sterilization time is at least 4 minutes and at least 35 minutes drying time for at least 15 minutes