Astringent Retraction Capsule Refill Pack – 3M ESPE

3M ESPE Retraction Capsule delivers a retraction paste that contains 15% aluminum chloride. The astringent retraction paste is...
Vendor: 3M
SKU: 3M-ESPE-ARC-RP-1U
Availability: In Stock
Rs. 5,250.00
Rs. 5,250.00
Rs. 5,250.00
Please hurry! Only 20 left in stock
Size: Astringent Retraction Capsule Refill Pack – 3M ESPE - 1 Unit
Subtotal: Rs. 5,250.00
10 customers are viewing this product
Astringent Retraction Capsule Refill Pack – 3M ESPE

Astringent Retraction Capsule Refill Pack – 3M ESPE

Rs. 5,250.00

Astringent Retraction Capsule Refill Pack – 3M ESPE

Rs. 5,250.00
Size: Astringent Retraction Capsule Refill Pack – 3M ESPE - 1 Unit
    • 3M ESPE Retraction Capsule delivers a retraction paste that contains 15% aluminum chloride. The astringent retraction paste is placed directly into the sulcus via a patented, easy-to-use, hygienic unit-dose capsule. The capsules are compatible with most composite dispensers.

      INDICATIONS:

      3M™ Retraction Capsule is indicated for the temporary tissue retraction of the marginal gingiva to provide a dry sulcus when the periodontium is healthy, such as:

    • Taking impressions (material-based or digital)
    • Preparation of temporary casts
    • Preparation of Class II and V fillings
    • Retracts tissue gently

    • A great impression—even a digital impression—starts with controlling tissue and moisture. Our capsule’s extra-fine tip delivers hemostatic paste right into the sulcus to gently retract tissue and control bleeding.
    • Save time

    • Unlike gingival retraction cords that can be difficult and time-consuming to place, the 3M retraction capsule is a fast, convenient and effective solution for gingival retraction. With its extra-fine tip, the 3M retraction capsule delivers a 15% aluminum chloride astringent paste right into the sulcus, pushing the gingival tissue away from the tooth and allowing you to capture a detailed impression of the preparation margin.
    • Features

    • Viscosity:Heavy Body
    • The extra fine tip fits directly into the sulcus.
    • Enables a clean, dry sulcus and robust hemostasis.
    • Hygienic unit-dose capsule.
    • Versus dental retraction cords:
    • Convenient and time-saving retraction process: Up to 50% faster.
    • Lower risk of hemorrhage.
    • Gentle on tissue for improved patient comfort.
    • Versus competing pastes:
    • Easy access into the sulcus.
    • Better interproximal access due to capsule’s extra-fine tip.
    • Compatible with most composite dispensers.
    • Key Specifications

      PRECAUTIONS:

      The product must not be used in patients suffering from a diseased periodontium, open furcations or exposed bone.

      FREQUENTLY ASKED QUESTIONS:

      For how long can the paste be left in the sulcus?

    • Typically, the paste should be left in the sulcus for a minimum of 2 minutes to achieve good retraction results. If a hemostatic device is applied too long it may exert unwanted negative effects on the tissue health. Therefore, the hemostatic retraction paste must be rinsed off completely.
    • How long can one store the capsule outside of the blister?

    • The capsule must be taken out of the blister immediately prior to application. It should not be stored outside the blister.
    • How many teeth can be treated with one capsule?

    • The content of one unit-dose capsule is sufficient to treat up to 3 teeth. The capsules are for single use and must not be used on more than one patient.
    • What is the orientation ring for?

    • The orientation ring corresponds in size and position to the perio probe. It is a feature for more precise and easy intraoral handling.
    • Why is there a lower risk of bleeding/post-hemorrhage than with cords?

    • Cords consist of small fibers that may be incorporated in the coagulum. When the cord is removed, the wound might be opened again. The paste is washed off by air-water spray and suction, resulting in a clean and dry sulcus area.
    • How can one judge if the retraction effect is sufficient?

    • The preparation margin should be clearly visible in the impression. The amount of excessive impression material (“flash”) that covers sulcular areas below the preparation margin is not important.
    • Does the 3M™ ESPE™ Retraction Capsule influence the setting of impression materials?

    • As with all astringents, the 3M ESPE astringent retraction paste may inhibit the setting of A-silicones (VPS) and Polyethers. The paste must be completely rinsed off with air-water spray and suction prior to impression taking.
    • Packaging

    • 25 x 7.5g Capsules
    • Direction to Use

      INSTRUCTIONS TO USE:

      1) Remove a retraction capsule from the blister and insert into dispenser (fits into most composite dispensers). Extrude a small amount of paste and discard.

      2) Insert retraction capsule tip into the sulcus.

      3) Slowly and steadily, inject astringent retraction paste into sulcus. Completely fill the sulcus.

      4) OPTIONAL: PROCEDURE WITH CORDS. For more gingival deflection, the astringent retraction paste can be used in combination with retraction cords.

      5) Leave astringent retraction paste on for a minimum of 2 minutes.

      6) Completely remove astringent retraction paste with air-water spray and suction.

    PACKING 

    • 25 x 7.5g Capsules

Related Products

Recently Viewed Products